We have updated our data protection policies based on new GDPR act. Privacy and Cookies Policy.
Photo-electric sensor, XUB, diffuse, Sn 0,1m, 12..24VDC, M12
Part Number:
2500212139
MPN:
XUB4BPANM12
- Product Type:
- Photoelectric Sensors
Please Log In
To view pricing, availability, and special offering, click the button below and log in.
Contact our Customer Support Team for assistance on this product
EA
Min: 1 EA
Technical Documents
Technical Documents
Product Documents
Technical Data Sheet
Manual
Technical Data Sheet
Product Details
Product Details
This design 18 single mode (diffuse system) photo-electric sensor has a nickel plated brass case. It has a supply voltage of 12V to 24V DC. This mono-mode cylindrical photoelectric sensor has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor. 1 LED display allows to identify status of the sensor. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified.
- · This design 18 single mode (diffuse system) photo-electric sensor has a nickel plated brass case.
- · It has a supply voltage of 12V to 24V DC.
- · This mono-mode cylindrical photoelectric sensor has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
- · Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor.
- · 1 LED display allows to identify status of the sensor.
Technical Specifications
Technical Specifications
Diffuse reflective photoelectric sensor | |
| Explosion safety category for gas | None |
|---|---|
| Explosion safety category for dust | None |
| Laser protection class | None |
| Material of optical surface | Plastic |
| Sensing mode | Light switching |
| Construction type housing | Cylinder, screw-thread |
| Type of light | Infrared light |
| Type of electric connection | Connector M12 |
| Type of switching output | PNP/PNP |
| Housing material | Metal |
| Type of safety acc. IEC 61496-1 | 1 |
| Operation agent-safety class | Safety class 0 |
| Type of switch function | Normally open contact (NO) |
| Degree of protection (IP rating) | IP67K |
| Voltage type | AC/DC |
| Maximum output current | 100 mA |
| Number of semiconductor outputs with signalling function | 1 |
| Number of protected contact energized outputs | 0 |
| Number of protected semiconductor outputs | 1 |
| Number of contact energized outputs with signalling function | 0 |
| Switching frequency | 500 Hz |
| Light dot | - mm² |
| Reaction time | 1 ms |
| Min. reflector distance | 0.3 mm |
| Transmission range of the safety field | 3 m |
| Width sensor | - mm |
| Height of sensor | - mm |
| AWG-number | - |
| Wavelength of the sensor | - nm |
| Max. output current at protected output | 100 mA |
| Switching voltage of OSSD at state "high" | - V |
| Diameter sensor | 18 mm |
|---|---|
| Length of sensor | 60 mm |
| Max. switching distance | 150 mm |
| Ambient temperature | -25 - 55 °C |
| Rated control supply voltage at AC 50 Hz | - V |
| Rated control supply voltage at AC 60 Hz | - V |
| Rated control supply voltage at DC | 12 - 24 V |
| Operating distance | 100 - 100 mm |
| With time function | No |
| Suitable for safety functions | No |
| Analogue output -10 V ... +10 V | No |
| Pre failure notice | No |
| With other analogue output | No |
| With communication interface analogue | No |
| With communication interface RS-232 | No |
| With communication interface Ethernet | No |
| With communication interface AS-Interface | No |
| With communication interface CANOpen | No |
| Analogue output 0 V ... 10 V | No |
| With monitoring function downstream switching devices | No |
| With restart blockage | No |
| Analogue output 0 mA ... 20 mA | No |
| Analogue output 4 mA ... 20 mA | No |
| With communication interface SSI | No |
| With communication interface SSD | No |
| With communication interface RS-485 | No |
| With communication interface DeviceNet | No |
| With communication interface INTERBUS | No |
| With communication interface PROFIBUS | No |
| With communication interface RS-422 | No |