XP95 I.S. Manual Call Point (Red)

The XP95 I.S. Manual Call Point has been designed to operate on a loop of intelligent fire detection devices and when activated interrupts the polling cycle for a very fast response. When activated, the intrinsically safe call point not only interrupts the polling cycle to indicate to the control panel that it has been operated, but also reports its address. Thus an alarm and its location can be reported in less than 0.2 seconds. Full details of the principles of operation and the electrical description are published in the XP95 Engineering Product Guide. XP95 I.S. manual call points have the same operating characteristics as the standard versions. They are available in two types of housing and in a number of versions. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed. The standard red I.S. manual call point is EN54-11:2001 compliant and has a resettable element. The range uses an IP67 weatherproof polycarbonate housing and is available in colours other than red. A transparent hinged cover part no: 44251-189 is available for protection against accidental operation. The XP95 IS Manual Call Point is loop powered and operates at 1422V DC.

• · Plug and Play terminal connections for fast wiring
• · Continuity link for wiring test before commissioning
• · Reports an alarm in under 0.2 seconds
• · Resettable element
• · Protocol Voltage 5 to 9V peak to peak
• · Quiescent Current Tested At 24V dc
• · Polarity L1 & L2 are polarity sensitive
• · Detection Principle Operation of a switch.
• · Key Type KAC Manal Call Point test & reset key
• · IP67